總線5.8G + 2.4G無線路由器無線鏡像連結

VCAN1244通用5.8G & 2.4G無線鏡像連結框

 

VCAN1244

通用 5.8 g & 2.4G無線鏡像連結框，無干擾

徜徉產品組成

（1）外部天線

（2）紅色, 黃色, and white standard AV interface

（3）12V電源 (紅色正, 負黑色)

（4）高清線

5 USB電源線

徜徉安裝方法

示意图图：

• Switching the corresponding signal input on the car display；
• Use the picture  device above connected to the AV port on the car display；
• 12上圖中嘅V電源輸入設備 (正紅色, 黑色負數) 到汽車後部#8217;s 12V電源， Or direct access to the USB cable into the back behind the car’s USB port for the 5V power supply
• 安裝成功後, 芒屏幕上顯示以下數字.
• 氼鏡儀（ IOS ） IOS連接 (播放鏡像)，take iPhone5 IOS8 for example, 睇吓呢個數字。第一, open the phone wifi settings – connected device wireless signal; 調用控制中心查找並選擇已檢查的設備播放鏡像, 然後成功鏡像!
• IOS模型描述 (鏡像同步)iphone：4s55c5s66加號…Ipad：234空氣分鐘12…

  MAC: Apple’s official website to check to prevail

  伊图克5

   

  米拉卡斯特（安卓）

  以原生安卓系統為例 (原生安卓系統 4.2 系統) 例如; 打開電話 “設置” – “顯示” – “無線顯示屏”, and look at the following picture.

• • 以上係一種原生安卓系統連接方法， 現時, the mobile phone manufacturer’s name MIRACAST is different, and the function locations are also different. 例如, 三星模型被稱為全共享鑄造, 屏幕圖像, 屏幕鏡像, and some are named WLAN display;
  • After connecting to the screen, there is not any conflict between wifi Internet and mobile Internet.

   

   

  徜徉連接路由器

  透過把設備連接到路由器, the IOS mirror can be connected to the same network mirror screen to cast

   

  第一種方法：

  1、 First let the phone’s wifi connect with devices, 然後打開網絡瀏覽器並輸入地址欄中嘅IP地址: 192.168.59.254, 連接成功之後，手機屏幕顯示在下圖中, 手機將輸入上圖第二張.

  2、Open the WIFI Connection item, 系統將自動掃描當前環境, 無線路由器圖, 選擇相應嘅無線路由器並輸入密碼, click submit button, and then point OK, 接口將自動退出. 等待約 5 seconds before the device can be connected to the router (the AP name will be displayed on the connected TV).