1. иә, the frequency range can be changed from 170Mhz (жақсырақ from 220Mhz) to 860Mhz. So it can work well at 260Mhz band.
2. Таратқыш пен қабылдағыштағы жиілікті бірдей етіп өзгерту керек. Себептен, Қуат күшейткіші мен антенна жиілігі бірдей жиілікті өзгертуі керек. (You need to buy a power amplifier and antenna for the transmitter and receiver to meet your changed frequency).
3. In order to improve the sensitivity of transmitting and receiving, the frequency bandwidth is generally made very narrow (center frequency ±15МГц, so bandwidth should be 30Mhz). The power amplifier of the transmitter and the frequency of the antenna are specially customized according to the frequency you need.
4. It is best when you place an order, please tell me what kind of working frequency you need. Our engineers will modify the frequency of the transmitter and receiver, and also modify the PA and custom antenna according to this frequency range to ensure the best sensitivity and support the longest transmission distance.
5. Әдепкі жиілік 590 МГц, 30 МГц жиілігімен (+/-15МГц), оны қуат күшейткіші мен антеннаны өзгертпестен өзгертуге болады. Мысалға, 578МГц, 584МГц, 590МГц, 596МГц, and 602Mhz.
6. If you need to modify the transmitter frequency and bandwidth, you need a special tool of the parameter configure board, please see the below picture, it is not a default accessory, please buy it at an extra cost or contact us before ordering.

иә, ол бейне және UART деректерін жіберуді қолдайды таратқыш пен қабылдағыштан.
Өйткені бұл бір жақты беріліс, сондықтан ол басқару пәрменін қабылдағыштан таратқышқа жібере алмайды.

If you need to send control commands or other data from the receiver to control other devices such as cameras or drones at the transmitter, you can add a set of cheap digital transmission equipment, бізбен хабарласыңы, and we can customize it for you.

Төмендегі сілтеме бойынша таратқыш пен қабылдағыштағы UART анықтамасын тексеріңіз. Өтінемін, сізде қорғасын кабельді алғыңыз келсе, айтыңыз. (әдепкі - жоқ)

Таратқыш әдепкі қуат күшейткіші болып табылады 2 Ватт, сондықтан ол қолдау көрсете алады 30 Көру сызығында КМ.

Төмендегі суретте таудан теңіз жағасына дейінгі сыналған қашықтық.

If you want to transmit a longer range, you can increase the power amplifier. In addition to one watt and two watts, we can also make 5 Вт, 10 Вт, және 20 watts for your choice. Larger amplifiers also require larger batteries and current support.

For 20W PA, the power supply should be 24~28V. Only at 28 volts can the power amplifier achieve the best workability.

Our engineer can change the frequency to 300Mhz from the default 590Mhz, The antenna, and PA in the warehouse are 590Mhz, 300Mhz needs two weeks to customize, so the delivery time needs longer than our default 590Mhz.

The default full set

1. SD Transmitter ( PA 0.5W, 1W, 2W, 5W, 10W, 20W, 50W optional according to your order demand)
2. SD Transmitter antenna
3. HDMI CVBS output receiver with parameter control menu and small screen
4. 0.8-meter Receiver antenna 1 дана. (There are two types of installing or fixing the antenna: 1. magnetic sucker base antenna, 2. әдепкі U-type clamp FRP fiberglass antenna )
5. міндетті емес, parameter configuration board for the wireless video transmitter.

(If you need a magnetic sucker base antenna, the express or carrier thinks the magnetic products will interfere with their plane safety, so the shipping cost is higher than a U-type clamp antenna. )

The default full set package dimension

1. 84*21*12СМ
2. Gross Weight 4.5KG
3. If you choose over 100cm antenna and magnetic sucker base antenna, Some freight forwarders will charge extra fees, such as extra long fees and extra fees for strong magnetic items.

1. The transmitter parameter configures board is different from the one on the receiver. The firmware on the parameter configure board was different from the transmitter and receiver, they cannot be used interchangeably.
2. The transmitter parameter configures board can adjust the signal attenuation on the transmitter. Per 0.3db will reduce the 0.5W PA.

сұрақ: Is it possible to change the outpout power (internal PA 0,5 W, 1 W, 2 W) via the configuration board?

1. As answered above, you can adjust the output power by setting the parameters of ATTEN through the parameter configuration board tool on the transmitter. (This tool does not include the default package, you need to notify that you want to have this tool when you order)
2. If you buy 2W PA, then you can set it 0.5W, 1W, but can not change it to 5W.
3. We also can make it to 5W, 10W, 20W, and 50W if you need to support long-range.

жоқ.

This wireless video transmitter only supports CVBS camera or video input, other type of video camera needs an extra converter box.

жоқ. It is COFDM (DVB-T) технология.

So the COFDM frequency range is 170-860Mhz. It can support 477, 610, 675, 724, 816МГц, but can not support 970, 1180, 1230 МГц.

Our special model transmitter can support all the above ranges, but the receiver needs to use the downconverter block.

In order to allow our wireless transmitting system to support a wider range and better signal strength, we generally set the operating frequency to a certain point (170~860Mhz), and its supported range is only plus or minus 15Mhz. Мысалға, the center frequency is 590Mhz, max support frequency range should be 575Mhz~605Mhz, The PA and antenna are specially customized according to this center frequency.

иә